The micro camera mounts are currently back ordered. We want to get this item out to you ASAP, so were are going to have discounted pricing until the mounts are back in stock. If you already have a micro mount laying around….you’re all set……if not, you can pick one up from almost any hobby retailer.
Strait off the Imperial Assembly Line!
This All Terrain Armored Transport is ready for action. It’s made using flexible TPU, but is actually quite stiff due too it’s shape. It provides protection for all your electronics and camera gear. It has access ports for the USB jack, VTX channel button, and opening to see the VTX channel indicator.
The back has holes are designed to hold the VTX antenna firmly in place. It also has 2 holes for your RX antenna(s).
The side panels hold your Velcro strap in place for the next battery swap…..They’re also accurate to the ATAT model. Pretty cool when design and function come to together.
The next cool design feature is the recessed hole in the head area.
It holds the capacitor everyone seems to hate. It’s also very well protected despite being located upfront. You will have to de-solder and add some wire, but its well worth it. If you somehow manage to break the cap, well then, the quad was destroyed anyways 🙂
The FULL kit includes the canopy and all hardware required:
- 1 -BabyWalk-R canopy
- 4 – Arm talons (motor/frame protectors)
- 1 -micro camera mount (back-ordered, will not be included)
- 2 -2mm x 5mm camera screws
- 2 – 2mm x 10mm standoff’s
- 2 – 2mm x 10mm canopy screws
- 1 – ESC pad (were giving this out free, you really need to protect that ESC.)
Install the brass standoff’s using the existing arm screws
Install the camera mount using the existing screws and nuts. Relocate the capacitor to the front.
Install the camera, do not use screws yet. They get installed after the canopy is on.
Install the canopy from the front first. Insert the cap into the hole in the head,
Organize your antennas. The standoff’s will lineup and slide into the holes in the canopy
Insert the 10mm screws and tighten down the back. The 5mm screws are for the camera.
Weave your velcro strap through the canopy
Make sure your not pinching any of the motor wires
Build, Crash, Repeat
Reviews
There are no reviews yet.